PUBLICATIONS

Close (-)

Book Chapters/Handbooks/Reports

NO BOOK CHAPTERS/HANDBOOKS/REPORTS

1

ABD RAHIM SHUIB (2017). Report on FAIS Symposium Kitakyushu Science Research Park, Fukouka, Japan. MPOB Report OP(382) 2017

2

MOHD RAMDHAN KHALID, ABD RAHIM SHUIB and NORMAN KAMARUDIN (2016). Report on 2nd International Competition on Oil Palm Mechanisation (ICOPM2), March – November 2016, MPOB Head Office, Bandar Baru Bangi. MPOB Report OP (367) 2016

3

MOHD SOLAH DERAMAN. Bab 21. Perusahaan Sawit di Malaysia: Satu Panduan. 4th Edition 2016.

4

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, ABDUL RAZAK JELANI, MOHD SOLAH DERAMAN, SALMAH JAHIS AND AHMAD HITAM (2009). Technologies for Oil Palm Harvesting, Evacuation and Loose Fruit Collection, MPOB.

5

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, ABDUL RAZAK JELANI, MOHD SOLAH DERAMAN, SALMAH JAHIS AND AHMAD HITAM (2008). Development of mechanization standards and bench-marks for labour efficiency in oil palm plantations, MPOB, Bangi.

6

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, ABDUL RAZAK JELANI, MOHD SOLAH DERAMAN, SALMAH JAHIS AND AHMAD HITAM (2008). Application of soil stabilizer for plantation road construction, MPOB, Bangi.

7

ABDUL RAZAK JELANI (2012). TatacaraPenggunaanPemotongSawitBermotor (CANTAS)

8

MOHD BASRI WAHID, ABD RAHIM SHUIB, ABDUL RAZAK JELANI, SALMAH JAHIS, MOHD SOLAH DERAMAN, MOHD RAMDHAN MOHD KHALID, AHMAD KUSHAIRI DIN, AHMAD TARMIZI MOHAMED (2010). Innovation in Oil palm Mechanisation: Tool of Achievement, MPOB

9

MOHD SOLAH DERAMAN (2002). " Perusahaan Sawit di Malaysia –SatuPanduan: Penjenteraan di LadangSawit"

10

MOHD SOLAH DERAMAN (2008). Penjenteraan Di LadangSawit. Buku Perusahaan Sawit Di Malaysia, SatuPanduan, EdisiMilinium. Updated Edition


Refereed Journal

NO REFEREED JOURNAL

1

MOHD RAMDHAN KHALID and ABD RAHIM SHUIB (2017). Performance of Oil Palm Loose Fruits Separating Machine. Journal of Oil Palm Research, Vol. 29 (3) September 2017 p. 358-365.
https://doi.org/10.21894/jopr.2017.2903.08

2

M.B. AZWAN, A.L. NORASIKIN, K. SOPIAN, S. ABD RAHIM, K. NORMAN, K. RAMDHAN AND D. SOLAH (2017). Assessment of electric vehicle and photovoltaic integration for oil palm mechanisation practice. Journal of Cleaner Production, Vol.140, p.1365-1375
https://doi.org/10.1016/j.jclepro.2016.10.016

3

MOHD AZWAN MOHD BAKRI, NORASHIKIN A LUDIN, KAMARUZZAMAN SOPIAN, ABD RAHIM SHUIB and SALMAH JAHIS (2016). Analysis of Energy Utilisation in Malaysian Oil Palm Mechanisation Operation. Journal of Oil Palm Research Vol.28 (4) Dec. 2016 p. 485-495.
http://jopr.mpob.gov.my/wp-content/uploads/2016/12/JOPR-VOL.284-9.pdf

4

DAVANNENDRAN CHANDRAN, NG HOON KIAT, HARRISON LAU LIK HANG, GAN SUYIN, CHOO, Y M and SALMAH JAHIS (2016). Compatibility of Biodiesel Fuel with Metals and Elastomers in Fuel Delivery System of a Diesel Engine. Journal of Oil Palm Research Vol.28 (1) March 2016 p.64-73.
https://doi.org/10.21894/jopr.2016.2801.08

5

MOHD RAMDHAN KHALID and ABD RAHIM SHUIB (2014). Field Evaluation of Oil Palm Mechanical Harvesting Machines for Tall Oil Palms. Journal of Oil Palm Research, Vol. 26 (2) June 2014 p. 125-132.
http://jopr.mpob.gov.my/field-evaluation-of-harvesting-machines-for-tall-oil-palms/?v=true

6

NORASHIKIN A LUDIN, M AZWAN M BAKRI, NORMAN KAMARUDDIN, KAMARUZZAMAN SOPIAN, M SOLAH DERAMAN, NORUL HISHAM HAMID, NILOFAR ASIM AND M YUSOF OTHMAN (2014). Malaysian Oil Palm Plantation Sector: Exploiting Renewable Energy towards Sustainability Production. Journal of Cleaner Production, Vol. 65 p. 9-15
https://doi.org/10.1016/j.jclepro.2013.11.063

7

ABDUL RAZAK JELANI, DESA AHMAD, AZMI YAHYA, AHMAD HITAM AND JOHARI JAMAK (1998). Force and energy requirement for cutting oil palm fronds. Journal of Oil Palm. Research Vol 10 No2.

8

ABDUL RAZAK JELANI, DESA AHMAD, AHMAD HITAM, AZMI YAHYA AND JOHARI JAMAK (1999). "Reaction Force and Energy Requirement for Cutting Oil Palm Fronds by Spring Powered Sickle Cutter". Journal of Oil Palm Research, Vol. 11 No. 2. December 1999.

9

ABDUL RAZAK JELANI, DESA AHMAD AND S.K.ROY (2000). Evaluation of design parameters of sickle and claw cutters for cutting oil palm frond. Agricultural mechanisation in Asia, Africa and Latin America. Vol 31 No 2 Spring 2000.

10

ABDUL RAZAK JELANI, AHMAD HITAM, JOHARI JAMAK, YOSRI GONO, MALIK NOR AND OMAR ARIFFIN. Motorised Cutter (Cantas TM) – A Tool for The Efficient harvesting of Oil Palm Fresh Fruit Bunches. Accepted. JOPR December 2008.

11

AHMAD HITAM AND SALMAH JAHIS (1995). Preliminary Observation of Using Palm Oil As Fuel for Cars Fitted with Elsbett Engine. J. Elaeis, pp 47-50

12

MOHD SOLAH DERAMAN, ABD RAHIM SHUIB AND AHMAD HITAM; Motorcycle trailer as multipurpose transport for oil palm small holders. Multidiscipline Modelling in Materials and Structures Journal.

13

MOHD RAMDHAN KHALID AND ABD RAHIM SHUIB (2014). Field Evaluation of Oil Palm Mechanical Harvesting Machines for Tall Oil Palms. Journal of Oil Palm Research Vol. 26 (2) June 2014 p. 125-132.


Non-refereed Journal

NO NON-REFEREED JOURNAL

1

ABDUL RAZAK JELANI, MOHD IKMAL HAFIZI and MOHD RIZAL AHMAD (2016). Quality Testing Laboratory for the Oil Palm Motorised Cutter. Oil Palm Bulletin No: 73 (November 2016) p. 1-5

2

MOHD RAMDHAN KHALID, ABD RAHIM SHUIB and MOHD SOLAH DERAMAN (2013). Mechanization: From Field to Mill. The Planter, Vol. 89 No. 1052, November 2013 p. 827-838

3

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID and MAIZAN ISMAIL (2014). Development of Half-track Articulated Tractor for Peat and Soft Ground. Oil Palm Bulletin 67 (November 2013) p. 11-16.


MPOB Publications

NO MPOB PUBLICATIONS

1

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, WAN ISHAK WAN ISMAIL AND NORAZMAN AIDROS (2010) Oil Palm Mechanical Harvester- A Technical Perspective. MPOB Technology No 32.

2

ABDUL RAHIM SHUIB, MOHD RAMDHAN KHALID AND MOHD SOLAH DERAMAN (2011). Further Advances in Oil Palm Research (2000 - 2010), Chapter 17: Innovation and Technologies for Oil Palm Mechanisation, MPOB. Pg 569-597

3

ABD RAHIM, S & AHMAD, H (2003). "Performance of WAKFOOT as in-field FFB transporter for soft ground and peat". Oil Palm Bulletin May 2003.

4

ABDUL RAZAK J, ABD RAHIM, S & AHMAD, H (1998). The effect of pole physical characteristics on the harvesting productivity of tall palms. PORIM Bulletin No 36.

5

ABDUL RAZAK JELANI AND AHMAD HITAM (2002). "Design and evaluation of An Improved Aluminium Harvesting Pole (Hi-Reach) for Tall Palm Harvesting". Oil Palm Bulletin, No. 44, May

6

MALEK, M. ABD RAHIM, S & MOHD NASIR, A (1997). "Factors inhibiting rate of mechanisation in oil palm estates". PORIM Bulletin, No. 34.


Proceeding

NO PROCEEDING

1

AHMAD KUSHAIRI DIN and ABD RAHIM SHUIB (2016). Innovations in oil palm Mechanisation. Paper presented at ISP National Seminar, 18-19 July 2016, Kuching.

2

ABD RAHIM SHUIB and MOHD RAMDHAN KHALID (2016). Research and development in oil palm mechanisation. Seminar on Robotic in Future Agriculture & Oil Palm Plantation. 29 July 2016, Faculty of Engineering, UPM.

3

ABD RAHIM SHUIB and MOHD RAMDHAN Khalid (2016). Innovation in oil palm mechanisation. Paper presented at International Symposium for Realization of Ultra-low Carbon Society and Design of Environmental Technology to Bridge of Asian Area, 26-28 Sept 2016, Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan.

4

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, ABDUL RAZAK JELANI , MOHD SOLAH DERAMAN, SALMAH JAHIS, MOHD AZWAN BAKRI, MOHD RIZAL AHMAD and IKMAL HAFIZI AZAMAN. Updates on R&D in Oil Palm Mechanisation. PILIPS & Seminar on Oil Palm Mechanisation (PalmMech 2016), Sandakan, 21 September 2016.

5

ABDUL RAZAK JELANI, MOHD SOLAH DERAMAN, MOHD RAMDHAN KHALID, MOHD RIZAL AHMAD, MOHD IKMAL HAFIZI AZAMAN, AZMAN ISMAIL and ABD RAHIM SHUIB. Penggunaan Mekanisasi Di Ladang Sawit. Poster presented at Persidangan Kebangsaan Pekebun Kecil Sawit 2016, 11-12 Oktober 2016, Ipoh, Perak.

6

MOHD RIZAL AHMAD; ABDUL RAZAK JELANI; MOHD IKMAL HAFIZI AZAMAN and ABD RAHIM SHUIB. Development and Performance Evaluation of New Generation Cantas. PILIPS & Seminar on Oil Palm Mechanisation (PalmMech 2016), Sandakan, 21 September 2016.

7

MOHD SOLAH DERAMAN; MUWAZIB ANUAR; SITI BALQIS JAAFAR; ABD RAHIM SHUIB and RUBA’AH MASRI. Employment Opportunities for Locals in Malaysian Oil Palm Industry - MPOB Role. PILIPS & Seminar on Oil Palm Mechanisation (PalmMech 2016), Sandakan, 21 September 2016.

8

MOHD SOLAH DERAMAN, MOHD RAMDHAN KHALID and ABD RAHIM SHUIB. RHYNO: Jentera Kompak Beroda Pelbagai Guna untuk Penggunaan Di Ladang Sawit. Poster presented at Persidangan Kebangsaan Pekebun Kecil Sawit 2016, 11-12 Oktober 2016, Ipoh, Perak

9

MOHD SOLAH DERAMAN. Penglibatan Belia Dalam Industri Sawit. Seminar Guna Tenaga Di Sektor Perladangan Sawit. 22 Feb 2016. MPOB Bangi.

10

MOHD SOLAH DERAMAN. Penglibatan Belia Dalam Industri Sawit. Seminar Guna Tenaga di Sektor Perladangan Sawit. 22 April 2016. Sandakan, Sabah.

11

AZWAN MB, NORSHILA AL, NORMAN K, KAMARUZZAMAN S, SOHIF, RAHIM AS, MUWAZIB AND SOLAH (2015). Technical Analysis of Battery Electric Vehicle (BEV) for Oil Palm Mechanization Operation. Paper presented at Advances in Renewable Energy Research 2015, UKM

12

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, ABDUL RAZAK JELANI , MOHD SOLAH DERAMAN, SALMAH JAHIS, MOHD RIZAL AHMAD and IKMAL HAFIZI AZAMAN (2014). Updates on R&D in Oil Palm Mechanisation. Paper presented at Seminar on Oil Palm Mechanisation (PalmMech 2014), Bangi, 25 November 2014.

13

MOHD SOLAH DERAMAN, MOHD RIZAL AHMAD, MOHD AZWAN MOHD BAKRI, MOHD RAMDHAN KHALID, ABD RAZAK JELANI AND ABD RAHIM SHUIB (2014). Teknologi Mekanisasi Terkini Untuk Meningkatkan Produktiviti Sawit. Paper presented at the Persidangan Pekebun Kecil Sawit Kebangsaan, 11 – 12 August 2014, Kuching, Sarawak.

14

MOHD RAMDHAN KHALID AND ABD RAHIM SHUIB (2014). Oil Palm Mechanisation: Recent Technologies and Challenges. Proceeding of National Conference On Agricultural And Food Mechanization (NCAFM) 2014, 20-22 May 2014, Kota Kinabalu, Sabah p. 404-412

15

MOHD RAMDHAN KHALID, ABD RAHIM SHUIB AND MOHD SOLAH DERAMAN (2013). Mechanization: From Field to Mill. 10th ISP National Seminar 2013 (Natsem 2013), 24-26 June 2013, Sibu, Sarawak. p. 187-197

16

MOHD RAMDHAN KHALID, ABD RAHIM SHUIB AND AHMAD TARMIZI MOHAMED (2012). Enhancement in Mechanization for Oil Palm. Paper presented at the Conference on Outlook in Palm Oil technology for SMEs (Palmex 2012), Sabah Hotel, Sandakan, 24 May 2012.

17

ABD RAHIM S, AHMAD, H AND CHEW, O K (1993). "The potential use of the low ground pressure (LGP) tyres on peat and soft ground areas in oil palm plantation". Proceedings of 1993 PORIM International Palm Oil Congress ' Update and Vision'. Kuala Lumpur.

18

ABD RAHIM SHUIB AND AHMAD HITAM (2001). "Enhancing productivity oil palm plantation through mechanisation. ISP Branch Seminar, Lahad Datu Sabah.

19

ABD RAHIM S, AHMAD TARMIZI, M, MOHD HANIFF, H, JUNAIDI Y, WAHID, O, CHAN, K W, MOHD BASRI, W, AHMAD, H AND KAMARUDZAMAN, A. (2003). Soil compaction caused by wheel traffic in oil palm estate: Preliminary soil and root study. PIPOC 2003, Marriott Hotel, Putrajaya

20

ABD RAHIM SHUIB (2004). Research and development on Mechanization at MPOB, presented at Seminar Kerjasama UKM - MPOB, Dewan Seminar Puri Pujangga, UKM, 29 January 2004.

21

ABD RAHIM SHUIB (2004). Half-track machine for all weather in-field collection of oil palm fresh fruit bunches, presented at First Asian Conference on Precision Agriculture, "Remote Sensing and Other Smart Farming Technologies for Precision Agriculture in Asia". 11-13 May 2004, The Legend Hotel, Kuala Lumpur.

22

ABD RAHIM SHUIB AND AHMAD HITAM (2005). Kaedah penuaian ke arah meningkatkan kadar perahan. Seminar Kebangsaan Pekebun Kecil, Century Mahkota Hotel, Melaka 11-12 January 2005.

23

ABD RAHIM SHUIB (2005). Innovation in oil palm mechanisation to increase productivity. "National Seminar on Oil Palm 3rd module". 7-8 March 2005, The Palace of Golden Horses Hotel, Seri Kembangan.

24

ABD RAHIM SHUIB (2005). Research and development on Mechanization at MPOB, presented at ISP Lower Perak Branch Seminar, Rubana Estate, TelukIntan, Perak 27 July 2005.

25

ABD RAHIM SHUIB, AZMI YAHYA AND ATAUR RAHMAN. (2005). Prime movers for enhanced mechanisation. PIPOC 2005, Sunway Convention Centre, Subang Jaya, Selangor, 26-28 September 2005.

26

ABD RAHIM SHUIB, MOHD RAMDAN KHALID, LEE YU LEONG AND WAN ISHAK WAN ISMAIL (2005). Development of harvesting machine for oil palm. International Advanced Technology Congress, IOI Marriott Hotel, PUTRAJAYA, 6-8 December 2005.

27

ABD RAHIM SHUIB, AHMAD ZAMRI YUSOF, NORAZAMAN AIDROS, RAHMAT KAMISAN AND CHEW OE KHENG (2007). "Enhancing Harvesting Operation Through Mechanization". Proceedings of PIPOC 2007.

28

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, NORAZMAN AIDROS, WAN ISHAK WAN ISMAIL, LEE YU LEONG (2007), Oil Palm Mechanical Harvester- Technical and Economics Perspective", presented at Biological Research Seminar, MPOB Demonstration Month 3rd August 2007.

29

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID AND MOHD SOLAH DERAMAN. (2009). Enhancing Productivity through Mechanisation in Oil Palm Plantations. National Conference on Agriculture and Food Mechanisation, 23 – 25 June 2009, Renaissance Hotel, Melaka

30

ABD RAHIM SHUIB, MOHD RAMDHAN MOHD KHALID AND MOHD SOLAH DERAMAN (2010). Innovation and Technologies in Enhancing Oil Palm Mechanisation. Proceeding 4th National Seminar on Oil Palm Mechanization (PalmMech) 2010, Kuala Lumpur

31

ABD RAHIM SHUIB AND MOHD RAMDHAN KHALID(2011). Development of Half -Track Articulated Tractor for Peat Area and Soft Textured Soils. Oral Paper presented at the MPOB International Palm Oil Congress (PIPOC) 2011, KLCC, 15 -17 November 2011.

32

ABD RAHIM SHUIB, MOHD RAMDHAN MOHD KHALID AND MOHD SOLAH (2013). Recent technologies Developed in Oil Palm mechanization Research. Proceeding 5h National Seminar on Oil Palm Mechanization (PalmMech) 2012, Bangi

33

ABDUL RAZAK JELANI, AHMAD HITAM, ABD RAHIM SHUIB, SALMAH JAHIS, MOHD BORHAN SELAMAT, JOHARI JAMAK AND MALIK NOOR (2003). Cutting mechanism: Historical development and advances. PIPOC 2003, Marriott Hotel, Putrajaya

34

ABDUL RAZAK JELANI, AHMAD HITAM AND ABD RAHIM SHUIB (2005). Teknologi Pemotongan Tandan Sawit. Seminar Kebangsaan Pekebun Kecil, Century Mahkota Hotel, Melaka 11-12 January 2005.

35

ABDUL RAZAK JELANI, MOHD RAMDHAN KHALID, AHMAD HITAM AND AMINULRASHID (2005). Alat penyuntik Mekanikal untuk Kawalan Sebaran Kulat Ganoderma. Seminar Kebangsaan Pekebun Kecil, Century Mahkota Hotel, Melaka, 11-12 January 2005.

36

ABDUL RAZAK JELANI, MUHD NAGEEB ABD WAHAB, RAHMAT KAMISAN, OMAR OTHMAN, SAZALE SAAR, SAPIAN ISMAIL, ABD RAHIM SHUIB, AHMAD TARMIZI MOHAMED AND AHMAD KUSHAIRI DIN. CANTAS – Geared for mechanized harvesting, Proceeding PALMMECH 2010, 22-23 Nov 2010.

37

ABDUL RAZAK JELANI (2012). CANTAS improvement based on Customer response. Proceeding 5h National Seminar on Oil Palm Mechanization (PalmMech) 2012, Bangi.

38

AHMAD HITAM AND SALMAH JAHIS (1995). Preliminary Observation of Using Palm Oil As Fuel for Cars Fitted with Elsbett Engine. Proceedings of 1995 PORIM International Biofuel Conference. Palm Oil Research Institute of Malaysia.

39

AHMAD HITAM AND SALMAH JAHIS (1998). Palm Oil as Diesel Fuel: Field Trial with Elsbett Engine, Proceedings of 1998 PORIM International Biofuel and Lubricant Conference. Palm Oil Research Institute of Malaysia.

40

AHMAD, H, ABD RAHIM, S & YUSOF, B (2001). Harvesting and evacuation of FFB in oil palm plantation. Proceedings of National Conference on Agricultural and Food Mechanisation 2001, MARDI. Serdang.

41

AHMAD HITAM, ABD RAHIM SHUIB AND DATO' DR YUSOF BASIRON (2001). Harvesting and evacuation of FFB in oil palm plantation (2001). Proceedings of National Conference on Agricultural and Food Mechanisation 2001, MARDI. Serdang.

42

MOHD RAMDHAN MOHD KHALID, MOHD SOLAH DERAMAN AND ABD RAHIM SHUIB (2010). Small Machinery in Oil Palm Plantations. Proceeding 4th National Seminar on Oil Palm Mechanization (PalmMech) 2010, Kuala Lumpur

43

MOHD RAMDHAN KHALID, ABD RAHIM SHUIB AND AHMAD TARMIZI MOHAMED (2012). Enhancement in Mechanization for Oil Palm. Conference on Outlook in Palm Oil technology for SMEs (Palmex 2012), Sabah Hotel, Sandakan, 24 May 2012.

44

MOHD SOLAH DERAMAN AND AHMAD HITAM (2005). Jentera Pengangkut BTS untuk Pekebun Kecil. Seminar Kebangsaan Pekebun Kecil, Century Mahkota Hotel, Melaka 11-12 January 2005.

45

MOHD SOLAH DERAMAN, ABDUL RAZAK JELANI, ABD RAHIM SHUIB, RAMDHAN MOHD KHALID AND SALMAH JAHIS. Mekanisasi Sektor Pekebun Kecil: Compact Transporter (CT) dan Pahat Pemotong Sawit Bermotor (Ckat TM). Proc. Persidangan Kebangsaan Pekebun Kecil Sawit 2008.

46

MOHD SOLAH DERAMAN, ABD RAZAK JELANI, ABD RAHIM SHUIB, SALMAH JAHIS, MOHD RAMDHAN KHALID DAN MOHAMAD SALIH JA'AFAR. Penggunaan Pemotong Sawit Bermotor (Cantas) dan Roller Picker: Alat Kutip Buah Sawit Relai; Meningkatkan Kecekapan Penuaian. Kertas Kerja dan Pembentangan Dalam Mesyuarat Jawatankuasa Pengembangan Dan Pemindahan Teknologi Kebangsaan Bil.2/2010. 17 Nov 2010. Kuala Kumpur.

47

MOHD SOLAH DERAMAN, MOHD FITRI SAFE'I, MOHD MUWAZIB ANUAR, MOHD AZWAN BAKRI, MOHAMAD ZUHAIRY ZULKIFLI, ABD RAHIM SHUIB, ABD RAZAK JELANI, SALMAH JAHIS AND MOHD RAMDHAN KHALID. Training Of Oil Palm Mechanization Operators (KOML). Proceeding of 4th Farm Mechanization Seminar (PalmMech 2010) 22-23 November 2010 Kuala Lumpur.

48

ROSNAH MOHD. YUSUFF, MOHD RAMDHAN KHALID, MOHD ASYRAF CHE DOI, YEOH POH CHIA, MOHD AZIZUL MOHD MUSLIM (2007). Work Posture Risk Analysis of Mechanical Loader Operators in Oil Palm Plantations. Proceeding of Agriculture Ergonomics Development Conference 2007.

49

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID AND MAIZAN ISMAIL (2014). Development of Half-track Articulated Tractor for Peat and Soft Ground. Oil Palm Bulletin 67 (November 2013) p. 11-16.

50

MOHD RAMDHAN KHALID AND ABD RAHIM SHUIB (2014). Oil Palm Mechanisation: Recent Technologies and Challenges. Proceeding of National Conference On Agricultural and Food Mechanization (NCAFM) 2014, 20-22 May 2014, Kota Kinabalu, Sabah p. 404-412.

51

MOHD AZWAN MOHD BAKRI, MOHD SOLAH DERAMAN AND ABD RAHIM SHUIB (2014). Kursus Operasi Mekanisasi Ladang: Melahirkan Belia Berkemahiran Dalam Sektor Perladangan Sawit. Paper will be presented at the Persidangan Pekebun Kecil Sawit Kebangsaan, 11 – 12 Ogos 2014, Kuching, Sarawak.

52

MOHD SOLAH DERAMAN, MOHD RIZAL AHMAD, MOHD AZWAN MOHD BAKRI, MOHD RAMDHAN KHALID, ABD RAZAK JELANI DAN ABD RAHIM SHUIB (2014). Teknologi Mekanisasi Terkini Untuk Meningkatkan Produktiviti Sawit. Paper will be presented at the Persidangan Pekebun Kecil Sawit Kebangsaan, 11 – 12 Ogos 2014, Kuching, Sarawak.


Information Series

NO INFORMATION SERIES

1

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, MOHD AZWAN BAKRI, AMINULRASHID MOHAMED and NORDIN SALLEH (2017). Oil Palm Loose Fruit Collecting Machine with Elevated Discharge Mechanism (LFC Mark IV). MPOB Information Series, MPOB TT No. 612.

2

ABDUL RAZAK JELANI, MOHD RIZAL AHMAD, MOHD IKMAL HAFIZI AZAMAN, ZAHARA MOHAMED, YOSRI GONO, SYAHMIN SUKAWAI, ASYRAF ADUKA, ASYRAF AZIZ, AZWAN BAKRI, AZMAN ISMAIL, ABD RAHIM SHUIB, NORMAN KAMARUDIN and AHMAD KUSHAIRI DIN. Battery Powered Harvesting Tool (2017). MPOB Information series, MPOB TT No. 613.

3

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, MOHD AZWAN BAKRI, AMINULRASHID MOHAMED and NORDIN SALLEH (2016). Hydra-Porter: Hydraulically Powered 4-Wheel FFB Transporter for Soft Structured Soil and Steep Terrain. MPOB Information series, MPOB TT No. 591.

4

ABDUL RAZAK JELANI, MOHD IKMAL HAFIZI AZAMAN, MOHD RIZAL AHMAD AND ABD RAHIM SHUIB (2015). Quality Testing Laboratory For The Oil Palm Motorised Cutter. MPOB Information series, MPOB TS No. 147.

5

MOHD IKMAL HAFIZI,; ABDUL RAZAK JELANI, ABD RAHIM SHUIB, AMINULRASHID MOHAMED, MUHAMAD FAUZI ISMAIL, MOHD RIZAL AHMAD AND IDRIS ABU SEMAN (2014). Tractor Mounted Trunk Injector for Control of Basal Stem Rot (BSR) Disease. MPOB Information series, MPOB TT No. 546.

6

MOHD SOLAH DERAMAN, ABD RAHIM SHUIB, ZAPRUNNIZAM MOHD ALI, AMINULRASHID MOHAMED AND HARTINI MD HASAN (2013). Rhyno: A Multipurpose Wheel Type Transporter for Oil Palm Activities on Undulating Terrain and Soggy Areas. MPOB Information series, MPOB TT No. 535.

7

MOHD SOLAH DERAMAN, ABD RAHIM SHUIB, AHMAD TARIZI MOHAMMED, ZAPRUNNIZAM MOHD ALI, AMINULRASHID MOHAMED AND HARTINI MD HASAN (2013). Beluga: Track–type Transporter for Oil Palm Field Activities in Peat Areas. MPOB Information series, MPOB TT No. 504.

8

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, MOHD SOLAH DERAMAN and AMINULRASHID MOHAMED (2012). Oil Palm Loose Fruits Collecting Machine (MK III). MPOB Information Series, MPOB TT No.505.

9

ABD RAHIM, S & AHMAD, H (1997). "The WAKFOOT- The FFB evacuation vehicle. PORIM Information Series TT No. 20, June 1997.

10

ABD RAHIM, S AND AHMAD, H. (2002). Half-track machine for in-field collection fresh fruit bunches. MPOB Information Series. MPOB TT 136.

11

ABD RAHIM SHUIB, ABDUL RAZAK JELANI, SALMAH JAHIS, SOLAH DERAMAN, MOHD RAMDHAN KHALID, AHMAD HITAM, YUSOF BASIRON, MOHD BASRI WAHID (2004). Development of a Machine for Harvesting Tall Palms. MPOB TT 217.

12

ABD RAHIM SHUIB AND MOHD RAMDHAN KHALID (2005). Air-Assisted Loose Fruit Separating Machine. TT No. 257.

13

ABD RAHIM S, NORMAN K, HANIFF H, WAHID O, IDRIS AS, RAMLAH AA, TARMIZI M AND AMIRULRASHID M (2008). Otowey: An in-field FFB transporter with electronic weighing system. MPOB Information Series No. 433, MPOB TT No. 408, 4pp.

14

ABD RAHIM SHUIB, AZMI YAHYA, WAN ISHAK WAN ISMAIL AND DESA AHMAD (2009). "A six-wheel-drive transporter for oil palm FFB evacuation". MPOB Information Series. MPOB TT No. 418.

15

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, MOHD SOLAH DERAMAN and AMINULRASHID IBRAHIM, (2011). Prime Mover for Soft Ground Area. TT No.489.

16

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, MOHD SOLAH DERAMAN and AMINULRASHID IBRAHIM, (2012). Oil Palm Loose Fruit Collecting Machine MKIII. TT No.505.

17

ABDUL RAZAK JELANI, AHMAD HITAM AND JOHARI JAMAK (1999). Oil palm mechanical cutter. Porim Information Series, PORIM TT No 60.

18

ABDUL RAZAK JELANI AND AHMAD HITAM (2000). Hi-reach harvesting pole. MPOB Information Series, MPOB TT No 86.

19

ABDUL RAZAK, J, ABD RAHIM, S & AHMAD, H (2000). Zirafah Pole. MPOB Information Series MPOB TT No 2.

20

ABDUL RAZAK JELANI, AHMAD HITAM AND JOHARI JAMAK (2001). Sprayer for young palms. MPOB Information Series, MPOB TT No 109.

21

ABDUL RAZAK JELANI, ABD RAHIM SHUIB, AHMAD HITAM, JOHARI JAMAK and MALIK MOHD NOOR (2003). Hand held Mechanical Cutter MPOB TT NO 180

22

ABDUL RAZAK JELANI, AHMAD HITAM, RAMDHAN KHALID, IDRIS ABU SEMAN, ABD RAHIM SHUIB (2004). Mechanical Trunk Injection for Control of Ganoderma. MPOB TT 215.

23

ABDUL RAZAK JELANI, AHMAD HITAM, JOHARI JAMAK, YOSRI GONO, MALIK NOR and FAUZI ISMAIL (2007). High-Reach Motorized Cutter (Cantas7).

24

ABDUL RAZAK JELANI, AHMAD HITAM, JOHARI JAMAK, AMINULRASHID MOHAMED, YUSRI GONO, FAUZI ISMAIL AND MALIK MOHD NOR (2008). Motorized Chisel (CkatTM) for short palm harvesting. MPOB Information Series No. 434, MPOB TT No. 409, 2pp.

25

ABDUL RAZAK JELANI, MUHAMAD NAGINUDIN, ABD RAHIM SHUIB, AHMAD TARMIZI MOHAMED & AHMAD KUSHAIRI DIN (2010). An improved oil palm motorized cutter - CANTAS MKII

26

ABDUL RAZAK JELANI, MOHD RAMDHAN MOHD KHALID, MOHD BORHAN SELAMAT, AMINULRASHID MOHAMED, YOSRI GONO AND AZMAN ISMAIL (2011). Application of Traction Aid for Transportation on Peat. MPOB Information Series, MPOB TT No.488.

27

AHMAD, H, & ABD RAHIM, S (1995). The Grabber MKII - An Automatic Mechanical Loader. PORIM TT 18

28

AHMAD, H, & ABD RAHIM, S (2000). "The Wakfoot MK2: An In-field FFB Transporter for Peat Area. MPOB TT No. 78, August 2000..

29

AHMAD HITAM AND MOHD SOLAH DERAMAN (2001). "Motorcycle trailer: An implement to assist smallholders for field activities". MPOB TT No. 107

30

AHMAD HITAM AND MOHD SOLAH DERAMAN (2001). "Powered wheelbarrow an implement to assist oil palm activities". MPOB TT No. 108.

31

MOHD RAMDHAN KHALID, SALMAH JAHIS AND ROPANDI MAMAT (2009). Vehicle Performance Evaluation for Research and Development. MPOB TS No. 60.

32

MOHD RAMDHAN KHALID, SALMAH JAHIS AND ROPANDI MAMAT (2009). Diesel Vehicles and Engines Gas Emission Assessment for Research and Development. MPOB Information Series No., MPOB TS No.61.

33

MOHD SOLAH DERAMAN, AHMAD HITAM, ABD RAHIM SHUIB, ABDUL RAZAK JELANI, MOHAMMAD BORHAN SELAMAT, AMINULRASHID MOHAMED AND NORDIN SALLEH (2006). Hovercraft for Infield Operation in Oil Palm Estate with Soft Ground Areas. MPOB Information Series. MPOB TT No. 315.

34

MOHD SOLAH DERAMAN, AHMAD HITAM, ABD RAHIM SHUIB AND AMINULRASHID MOHAMED (2006). Compact Transporter for infield Activities. MPOB Information Series. MPOB TT No. 316.

35

MOHD SOLAH DERAMAN, ABD RAHIM SHUIB, AHMAD HITAM, ZAPRUNNIZAM MD ALI AND FAUZI ISMAIL (2008). Compact transporter for field spraying operations (CT-Spray). MPOB Information Series No. 432, MPOB TT No. 407, 3pp.

36

MOHD SOLAH DERAMAN (2009). Roller Type Oil Palm Loose Fruit Picker. MPOB Information Series. MPOB TT No. 419.

37

MOHD SOLAH DERAMAN, ABD RAHIM SHUIB, AHMAD TARMIZI MOHAMED, ZAPRUNIZAM MOHD ALI, AMINULRASHID MOHAMED AND HARTINI HASAN (2012). Beluga: Track-type transporter for Oil Palm Field Activities in Peat Areas. MPOB TT No 504

38

SALMAH JAHIS AND AHMAD HITAM (1999). Mechanical Loader for Short Palm - Crabbie. PORIM Information Series. PORIM TT No 59, June 1998.

39

SALMAH JAHIS, AHMAD HITAM, ZAPRUNNIZAM MOHD ALI AND MALIK MOHD NOR (2002). Fertiliser Spreader for Young Palm. MPOB Information Series, MPOB TT No. 135, May 2002. No. 56.

40

SALMAH JAHIS, MOHD RAMDHAN MOHD KHALID AND MOHAMAD BORHAN SELAMAT (2011).Evaluation of Fuel Performance for Research and Development.MPOB Information Series, MPOB TS No.101.


Viva and Technical Reports

NO VIVA AND TECHNICAL REPORTS

1

ABD RAHIM SHUIB AND AHMAD HITAM (2001). "Mechanical loading of oil palm FFB in-field collection - The Grabber. Viva No. 136/2001(3)

2

ABD RAHIM SHUIB AND AHMAD Hitam (2001). "Development of all-weather vehicles for evacuating of oil palm fresh fruit bunches. Viva No. 150/2001(18).

3

ABD RAHIM SHUIB AND AHMAD HITAM (2002). "Performance of WAKFOOT as in-field FFB transporter for soft ground and peat. Viva No. 194/2002(8).

4

ABD RAHIM SHUIB AND AHMAD HITAM (2003). "Trail-type loose fruit collecting machine for the platform". Presented to Viva committee on 27 February 2003. Viva no 226/2003(05).

5

ABD RAHIM SHUIB, MOHD SOLAH DERAMAN AND AHMAD HITAM (2004)."Development of rubber track transporter for in-field FFB evacuation on peat and soft ground". Viva No 277/2004(15)

6

ABD RAHIM SHUIB, MOHD RAMDHAN KHALID, ABDUL RAZAK JELANI, SALMAH JAHIS, MOHD SOLAH DERAMAN, AHMAD HITAM AND MOHD BASRI WAHID(2008). "Development and Field Evaluation of Oil Palm Harvesting Machine Project : Viva No. 437/2008(25)

7

ABD RAHIM SHUIB, MOHD HANIFF HARUN, WAHID OMAR, AHMAD TARMIZI MOHAMED AND MOHD BASRI WAHID (2009). Study on the effect of soil compaction due to mechanisation in oil palm estate. Viva No 465/2009 (15)

8

ABD RAHIM SHUIB & MOHD RAMDHAN KHALID (2012). A 6WD with 4WS Transporter for In-field Collection of FFB - Viva No 578/2012(06)

9

ABDUL RAZAK JELANI, AHMAD HITAM, ABD RAHIM SHUIB, JOHARI JAMAK AND MALIK MOHD NOR (2003). "Mechanical cutter". Viva committee on 28 October 2003. Viva no 253/2003(32)

10

ABDUL RAZAK JELANI, Report on Technical visit AVRDC Taiwan, 26-30 April 2005.

11

ABDUL RAZAK JELANI (2009) Trunk Injection Apparatus for Ganoderma control. Viva committee on 9 Jan 2009.

12

ABDUL RAZAK JELANI (2012) Traction aid for peat transporters. No. 610/2012 (38)

13

AHMAD KUSHAIRI DIN, ABD RAHIM SHUIB, MOHD RAMDHAN MOHD KHALID (2010).Report On Technical Visit To Hunan Sunward Intelligent Machinery Co., China &Hengyang Hengtuo Farm Machinery Manufacture Co. Ltd, ChinaFrom 21 to 24 June 2010. MPOB Report OP (199) 2010.

14

MOHD RAMDHAN KHALID, ABD RAHIM SHUIB (2008) Development of Air-Assisted Loose Fruit Separating Machine, MPOB Viva No.443/2008 (31).

15

MOHD RAMDHAN MOHD KHALID AND NORDIN SALLEH (2010).Report On Technical Visit To Hunan Sunward Intelligent Machinery Co., China From 15 July to 6th August 2010. MPOB Report OP (198) 2010.

16

SALMAH JAHIS (2001). "Mechanical FFB Loader For Short Palm". VIVA No. 37/2001(4)

17

SALMAH JAHIS (2002). "Mechanical Fertiliser Spreader for Young Palm" VIVA No. 37/2002

18

SALMAH JAHIS, Pruning Machine. Presented during the 135th Viva Committee Meeting on 25th June 2009.


News Paper Articles

NO NEWS PAPER ARTICLES

1

ABDUL RAZAK JELANI, United Plantation cadang tingkat guna Cantas – Berita Sawit Mac 2010

2

ABDUL RAZAK JELANI, Cantas Mark III kurangkan tenaga kerja sektor perladangan – Berita Sawit Julai 2010

3

ABDUL RAZAK JELANI, Diskaun RM1000 pembelian Cantas – Berita Sawit August 2010

4

ABD RAHIM SHUIB AND AHMAD HITAM (2003). "Trail-type loose fruit collecting machine for the platform". Presented to Viva committee on 27 February 2003. Viva no 226/2003(05).

5

ABDUL RAZAK JELANI, 1228 unit Cantas dijual – Berita Sawit Oktober 2010

6

ABDUL RAZAK JELANI, Cantas tingkatkan produktiviti tuaian sawit – Utusan Sawit November 2010

7

MOHD SOLAH DERAMAN, Kursus Operator Mekanisasi Ladang (KOML), Tenaga Kerja di Tanah Rancangan, Berita Sawit, Sisipan Berita Harian, 4 Disember 2010

8

MOHD RAMDHAN KHALID. Mesin mengasing sampah, bahan asing dengan buah relai sawit. Berita Sawit, 4 Disember 2010.


Patents

List of Patent Filed Awaiting Grant

NO INTELLECTUAL PROPERTY INVENTORS FILED

1

Palm Fruit Harvesting Machine

Abdul Rahim Shuib

1999

2

Trunk Injection Apparatus (TIA), New Title: Injection Apparatus for Plants, Application

Abd Razak Jelani,Hj
Ahmad Hitam, Mohd
Ramadhan Khalid,
Aminulrashid Mohamad.

2005

3

Method & Apparatus for injecting plant

Abdul Razak Jelani,
Ramdhan Khalid,
Ahmad Hitam,
Abd Rahim Shuib,
Aminulrashid Mohamed.

2007

4

An Improved Air-Cushioned Vehicle

Mohd Solah Deraman,
Ahmad Hitam,
Abd Rahim Shuib,
Yahya Mohd Nor,
Mohammad Borhan Selamat,
Aminulrashid Mohamed.

2008

5

A Load Lifting Device on a Vehicle

Mohd Solah Deraman,
Ahmad Hitam,
Abd Rahim Shuib
Aminulrashid Mohamed

2008

6

Motorised Chisel

Abd. Razak Jelani,
Dr Ahmad Hitam,
Johari Jamak,
Malik Mohd Nor,
Yusri Gono.

2008

7

A Cutter

Abd. Razak Jelani & UPM

2009

8

An Electricity Generating Means

Abd. Razak Jelani & UPM

2009

9

Apparatus and Method for Measuring Fruit Ripeness

Abdul Rahim Shuib

10

Method and Apparatus for Injection Plants

Abdul Razak Jelani and Idris Abu Seman

2007

11

Agricultural Transporter Vehicle

Abdul Rahim Shuib

2010

12

The Application of Traction Aid for Transportation on Soft Soggy Soils

Abdul Razak Jelani and Mohd Ramdhan Mohd Khalid

2011

13

A Permanent Magnet Motor

Abdul Razak Jelani UPM

2011

14

A Motorised Cutter

Abdul Razak Jelani & UPM

2011

15

A Cutting Device

Abdul Razak Jelani,
Abd Rahim Shuib,
Mohd Ramdhan Mohd Khalid

2011

16

Harvest Collecting Device

Abd Rahim Shuib,
Mohd Ramdhan Khalid,
Aminulrashid Mohamed,
Zaprunizam Mohd Ali
and Nordin Salleh

2012

17

A Cutting Instrument and a Method thereof

Abd. Razak Jelani,
Abd Rahim Shuib,
Johari Jamak,
and Nordin Salleh

2012

18

Motorised Cutting Tool

Abd. Razak Jelani and Abd Rahim Shuib

2012

19

Cutting Head for Oil Palm Motorised Cutter for Vibratio

Abd. Razak Jelani,
Mohd Rizal Ahmad,
Mohd Ikmal Hafizi Azaman,
and Yosri Gono

2013

20

A Cutter with a Connector

Abd. Razak Jelani,
Mohd Rizal Ahmad,
Mohd Ikmal Hafizi Azaman,
and Yosri Gono

2014

21

Energy Savinng Device (ESD) for Harvesting and Prunning

Abd. Razak Jelani,
Mohd Rizal Ahmad,
Mohd Ikmal Hafizi Azaman,
and Yosri Gono

2014

22

A mobile loose oil palm fruits separator. PI 2017701676

Abd Rahim Shuib;
Mohd Ramdhan Khalid;
Aminulrashid Mohamed
and Nordin Salleh.

2017

23

Palm fruit harvesting machine. PI 2017701313

Abd Rahim Shuib;
Mohd Ramdhan Khalid;
Aminulrashid Mohamed
and Nordin Salleh.

2017

24

Hydra-porter - An in-field FFB evacuation for soft structured soil and hilly terrain PI 2017702014

Abd Rahim Shuib;
Mohd Ramdhan Khalid;
Aminulrashid Mohamed
and Nordin Salleh

2017

25

A Motorised Portable Cutting Device. PI 2017702016.

Abdul Razak Jelani,
Mohd Rizal Ahmad,
Mohd Ikmal Hafizi Azaman
and Yusri Gono

2017

List of Patents Granted

NO INTELLECTUAL PROPERTY INVENTORS PATENT NO. / DATE GRANTED

1

A crane fitted to mini-tractor for mechanical loading of oil palm fresh fruit bunches (FFB) (Apparatus for Gathering and Loading Oil Palm Fruit)

Abdul Rahim Shuib and Ahmad Hitam

MY-108062-A
15 Aug 1996

2

Improved Method for Loading Fresh Fruit Bunches

Ahmad Zamri Md Yusof and Ahmad Hitam

MY 125859-A
30 Aug 2007

3

Oil palm fronds and fruit bunches cutter (Claw cutter)

Abdul Razak Jelani and Ahmad Hitam

MY-120349-A
31 Oct 2005

4

An Apparatus for Picking and Loading Oil Palm Fresh Fruit Bunches

Salmah Jahis and Ahmad Hitam

MY-131988-A
1998

5

Apparatus for collection of fruits using partial track system

Abd Rahim Shuib and Ahmad Hitam

MY13986-A
28 Sept 2007

6

Improved vehicle for collection of fresh fruit bunches

Abd Rahim Shuib and Ahmad Hitam

MY-127934-A
31/1/2007

7

Improved vehicle for collection means

Abd Rahim Shuib and Ahmad Hitam

MY-132558-A

8

Mechanised Sickle Cutter for Oil Palm Fronds and Fruit Bunches

Abdul Razak Jelani and Ahmad Hitam

MY-127947-A
31 Jan 2007

9

Mechanized C-curved Mechanical Cutter (Sickle)

Abdul Razak Jelani,
Ahmad Hitam,
Johari Jamak
and Malik Noor

MY-06-01022(industrial design)
28Dec 2006

10

Motorised Tree Climbing Harvester (The Panjat -Harvester Project)

Ahmad Fuad,
Dr Hj Ahmad Hitam,
Abd Rahim Shuib

MY-124524-A
30 Jun 2006

11

Hi-Reach Harvesting Pole

Abdul Razak Jelani and Ahmad Hitam

MY-135064-A
31 Jan 2008

12

A mechanized harvesting device utilizing a rapid chopping method

Abdul Razak Jelani,
Ahmad Hitam,
Johari Jamak,
Yosri Gono
and Malik Noor

MY-136496-A
31 Oct 2008

13

A Connecting Device

Mohd Solah Deraman,
Ahmad Hitam
and Abd Rahim Shuib

MY-136292-A
31 Sept 2008

14

A motorised apparatus (sprayer for young palm)

Abdul Razak Jelani,
Ahmad Hitam and Johari Jamak

MY-142714-A
31 Dec 2010

15

Air-Assisted Loose Fruits Separating Machine

Abd Rahim Shuib,
Mohd Ramdhan Khalid,
Johari Jamak
and Yusri Gono.

MY-141893-A

16

A Harvesting Device

Abdul Razak Jelani

889 (Columbia)
27 July 2012

17

A Moving Magnet of Linear Oscillatory

Abd. Razak Jelani & UPM

MY-145196-A
13 Jan 2012

18

Collection Device

Mohd Solah Deraman,
Ahmad Hitam,
Abdul Rahim Shuib
and Mohd Salleh Jaafar

MY-145490-A
29 Feb 2012

19

An Oil Palm Electrical Motorised Cutter

Abd. Razak Jelani & UPM

MY-146560-A
30 August 2012

20

A Cutting Head for Motorised Cutter

Abdul Razak Jelani,
Abd Rahim Shuib,
Mohd Ramdhan Mohd Khalid

MY-149538-A
13 Sept 2013


Radio and TV Programme

NO RADIO AND TV PROGRAMME

1

ABDUL RAZAK JELANI, Majalah 3 TV3, 2008. CantasSawit.

2

ABDUL RAZAK JELANI, Agrotek CANTAS, Mac 2012

3

ABDUL RAZAK JELANI, Agrojournal CANTAS, May 2012

4

ABDUL RAZAK JELANI, ETP PEMANDU, Jan 2012


Commercialization

NO COMMERCIALIZATION

1

MOA with Fancy Power SdnBhd on the production and marketing of Hi-Reach harvesting pole

2

MOA with Fancy Power SdnBhd on the production and marketing of Motorized Cutter (CANTAS)

3

MOA with Jariz Technologies SdnBhd on production and marketing of motorized chisel (C-kat)

4

MOA with Jariz Technologies SdnBhd on production and marketing of motorized cutter (CANTAS 7)

5

MOA with Jariz technologies on the production and marketing of Trunk Injection Apparatus (TIA)

6

MOA with SaplantcoSdnBhd on production and marketing of motorized chisel (C-kat)

7

MOA with Modenas on the production of 2-stroke petrol engine for attachment for motorized cutter (CANTASTM)

8

MOU with MAGVIEW (M) Sdn. Bhd. on production and marketing of Compact Transporters

9

MOU with NAFAS JenteraSdnBhd on production and marketing of CANTAS

10

MOU with FASSB on production and marketing on CANTAS

11

MOU with UTHM on collaborative work on harvesting technology

12

MOU with AAZ-Bina Kejuruteraan & Pembekal Sdn Bhd (2010) MPOB TT No. 107: 2001: The Production Of Motorcycle Trailer As Multipurpose Transport For Small Holders

13

MOU with AAZ-Bina Kejuruteraan & Pembekal Sdn Bhd (2010) MPOB TT No. 108: 2001: The Production of Powered Wheelbarrow

14

MOU with MyHardware Trading (2010)MPOB TT No. 419: 2009: The Production of Roller Picker: Roller Type Oil Palm Loose Fruit Picker.

15

MOU with MIZOU Holding (M) Sdn. Bhd. Collaboration Project Development of Small Vehicle for Field Operation on Peat Area


Services

NO SERVICES

1

Harvesting Technology

2

Mechanisation of in-field FFB evacuation

3

Mechanisation of field maintenance

4

Incubation for machines and implements fabrication

5

Advisory on oil palm farm mechanisation

6

Technical hands-on training on farm mechanisation - KOML, KAC

7

Vehicle Performance Evaluation for Research and Development

8

Diesel Vehicles and Engines Gas Emission Assessment for Research and Development


R&D FACILITIES

NO R&D FACILITIES

1

Fabrication Utilities.

2

Welding.

3

Machining Equipment.

4

Painting Booth and Equipment.

5

Machines/Tractor Assembly.

6

Automotive Service and Repair.

7

Design Lab equipped with Computer Aided Design (CAD) and Finite Element Analysis (FEA) Software's.

8

Hydraulic Test Kid.

9

Soil Compaction Testing Lab and Equipment.

10

Engine and Vehicle Test Bed.

11

Diesel Gas Emission Testing Equipment